Top » Catalog » EPROM Programmer » PCB6.0E

$69.95

Willem EPROM Programmer PCB6.0E
[PCB6.0E]

Introducing our newest Universal Willem EPROM programmer PCB version PCB6.0E LPT version. This board has many enhanced features, such as built-in dedicated SPI BIOS ZIF socket and DIP FWH / LPC socket, thus NO NEED to pay extra to purchase these optional adapters. A FREE PLCC32toDIP32 adapter will be included for your convenience if you happen to have PLCC32 package chips to program. The PCB layout is fully optimized and the digital circuitry is separated from the power supply circuit, thus reducing interference. High precision digital switching ICs are used to control the Vpp circuit ( vs cheap regular transistor controlled, used in other manufacturers products), thus dramatically improves the burning accuracy and reliability by multitudes. Quality components are used, for example, the high current tolerant coil is used to boost the robustness of the circuitry. Optional higher Vcc voltages (5.6v and 6.2v) will be available when an external AC power supply is used. This is very important when you want to smoothly and reliably burn those old CMOS and even older NMOS EPROM chips. This programmer can also read and burn EEPROM, FLASH, and Microcontroller (MCS-51, AVR and PIC family) chips.

The serial part of the programmer supports more than 7951 SPI type of BIOS chips, which is listed HERE.

This ready-to-go package includes the following items:

1. Willem Universal EPROM Programmer Board, PCB version 6.0E LPT Version, fully assembled;
2. Software and manual CD;

3. A FREE PLCC32toDIP32 adapter;
4. FREE DB25 and USB cables;

We use USPS Priority mail service within USA, it usually takes about 2-3 working days to reach most locations within continental US.

Device types supported

The serial part of the programmer supports more than 7951 SPI type of BIOS chips, which is listed HERE. The parallel part of this Willem programmer supports the chips listed below:

EPROM	27C64, 27C128, 27C256, 27C512, 27C010, 27C020, 27C040, 27C1001 M27C1001, M27C2001, M27C4001 27C080 (A19) , M27C801, M87C257 2764, 27128, 27256, 27512, 27010
EEPROM	28C65,28C64, 28C128, 28C256,28C512, 28C010, 28C020, 28C040 M28C16A/17A (DIP28) (Adapter or Jumper) 28C16,XLS2816 (DIP24)
FLASH Memory	28F64, 28F128, 28F256, 28F512,28F010, 28F020 MX26C1000, MX26C2000, MX28F1000, MX28F2000 Am28F256A, Am28F512A, Am28F010A, Am28F020A (New command erase/prog.) -- intel --- i28F001BX, 28F004, 28F008, 28F016
FLASH Memory	29F64, 29F128, 29F256, 29F512,29F010, 29F020, 29F040, 29F080 29F001,29F002, 29F004, 29F008, 29F016, 29F032
Serial (I2C) EEPROM 24Cxx	24C02,24C04,24C08,24C16, 85C72, 85C82, 85C92 --- page write ---- 24C32,24C64,24C128,24C256,24C512
Microwire EEPROM	<------ Data 8bit -----> (pin 6 ->ORG. [Schematic connect to GND]) 93C06, 93C46, 93LC46, 93C56, 93C57, 93C66, 93C76, 93C86 (8bit), AT59C11, AT59C22, AT59C13 CAT35C102, CAT35C104, CAT35C108 (pullup pin7) <------Data 16bit------> (pin 6 ->NC [No Connect]) 93C06A ,93C46X,93C56,93C66,93C76,93C86 (NS)
MicroChip PIC	16C84 , 16F84 ,16F84A , 16F627/16F628 12C508/A , 12C509/A , 12CE518 , 12CE519 , 16C505 16C620 , 16C621 , 16C622 , 16CE623 , 16CE624 , 16CE625 , 16C710/711 ---ICSP connector----(you will need to have an optional PIC adapter in order to program these newly added PICs) 16F870 , 16F871 , 16F872 , 16F873 , 16F874 , 16F876 , 16F877 PIC16F873A , PIC16F874A , PIC16F876A , PIC16F877A -Add PIC microchip 14bit PIC12F629 , PIC12F675 , PIC16F630 , PIC16F676 , PIC12F635 , PIC12F683 , PIC16F636 , PIC16F684 , PIC16F688 PIC16F72/73/74/76/77 , PIC16F737/747/767/777 , PIC16F87/88 , rfPIC12F675x , PIC16F785/PS200 , PIC16F716 -Add microchip 14bit,12bit OTP PIC12C671 , PIC12C672 , PIC12CE673 , PIC12CE674 PIC16C61/71 , PIC16C62/64/65/73 , PIC16C62A/62B/62C/63/63A/64A/65A/65B/66/67 PIC16C72/72A/73A/74A/74B/76/77 , PIC16C620/620A/621/621A/622/622A PIC16CE/623/624/625 , PIC16C710/711/712/716 , PIC16C773/774 , PIC16C745/765/923/924 , PIC16C925/926 PIC16C554/556/557/558 , PIC16C432/433 , PIC16C717/770/771/781/782 -Add PIC microchip 14bit PIC12F629/675 , PIC16F630/676 , PIC12F635/683 , PIC16F636/684/688 , PIC16F72/73/74/76/77 , PIC16F737/747/767/777 , PIC16F87/88 , rfPIC12F675x , PIC16F785/PS200 , PIC16F716 -Add microchip 14bit OTP PIC12C671 , PIC12C672 , PIC12CE673 , PIC12CE674 , PIC16C61/71 , PIC16C62/64/65/73 , PIC16C62A/62B/62C/63/63A/64A/65A/65B/66/67 , PIC16C72/72A/73A/74A/74B/76/77 , PIC16C620/620A/621/621A/622/622A , PIC16CE/623/624/625 , PIC16C710/711/712/716 , PIC16C773/774 , PIC16C745/765/923/924 , PIC16C925/926 , PIC16C554/556/557/558 , PIC16C432/433 , PIC16C717/770/771/781/782 -Add PIC microchip 12bit (FLASH memory) PIC12F508/509 , PIC10F200/202/204/206 , PIC16F505 , PIC16F54/57 -Add PIC18Fxxx PIC18F242 , 18F248 , 18F252 , 18F258 , 18F442 , 18F448 , 16F452 , 16F458 PIC18F1220 , 18F2220 , 18F4220 , 18F1320 , 18F2320 , 18F4320 PIC18F6520 , 18F6620 , 18F6720 , 18F8520 , 18F8620 , 18F8720 PIC18F2331 , 18F2431 , 18F4331 , 18F4431 PIC18F6525 , 18F6621 , 18F8525 , 18F8621 PIC18F6585 , 18F6680 , 18F8585 , 18F8680 PIC18F2439 , 18F2539 , 18F4439 , 18F4539 PIC18F6410 , 18F8410 , 18F6490 , 18F8490 Add PIC18Fxxx PIC18F2410 , PIC18F2420 , PIC18F2455 PIC18F2510 , PIC18F2515 , PIC18F2520 , PIC18F2525 , PIC18F2550 , PIC18F2585 PIC18F2610 , PIC18F2620 , PIC18F2680 PIC18F4410, PIC18F4420 , PIC18F4455 PIC18F4510 , PIC18F4515 , PIC18F4520 , PIC18F4525 , PIC18F4550 , PIC18F4585 PIC18F4610 , PIC18F4620 , PIC18F4680 Add Find and edit value OSCCAL (PIC12F629/675 , PIC16F630/676) Add Edit config at address 0x2008,0x2009 (PIC12F635/683 , PIC16F636/684/688 , PIC16F785) Fixed Programming PIC all Test on chip PIC12F675 , PIC16F676 , PIC16F684 ,PIC16F767, PIC16F74 PIC16F872 , PIC16F876 , PIC16F877, PIC16F876A, PIC16F873A, PIC16F819 PIC16F84 , PIC16F84A , PIC16F628, PIC16F628A, eprom PIC12C509JW , PIC16C505JW , PIC16C711JW , PIC16CE625JW PIC18F458 , PIC18F4320 , PIC18LF258 , PIC18F4539 , PIC18F4431
Atmel Flash Memory (Sector Programming) (Software Data Protection)	AT29C256, AT29C512,AT29C010A, AT29C020, AT29C040,AT29C040A W29EE512,W29EE011, W29EE012, W29C020(128),W29C040 PH29EE010(W29EE011) ASD AE29F1008 (AT29C010), AE29F2008 (AT29C020) Ver 0.992 up(DOS). Can run under win9x (disable prog. CPUIdle or CPUCool)
Atmel Flash Memory AT49Fxxx (Subset 29Fxxx) (Byte-by-Byte Programming) (Software Data Protection)	Command seq. 5555/AA, 2AAA/55, 5555/A0 AT49F512, AT49F010, AT49F020, AT49F040 SST39SF010, SST3S9F020 ,SST39SF040 AT49F001,AT49F002 , AT49F008A Command seq. 555/AA, 2AA/55, 555/A0 Am29F512, Am29F010, Am29F020, Am29F040,HY29F080 29F002, 29F002T, Pm29F002T
Serial Peripheral Interface (SPI) EEPROM Mode0 (0,0) AT25xxx, W95xxx	[Atmel] AT25010,020, 040 (A8-A0) AT25080, 160, 320, 640, 128, 256 (A15-A0) [ST] W95010....256, Microchip 25x010 - 25x640 --- Byte programming 25010,25020,25040 --- Page programming 25C080,25C160,25C320,25C640,25C128,25C256,25C512 AT25HP256,AT25HP512 AT25HP1024 (24bit address) -- CAT64LCxxx (16bit DATA IN/OUT) use Socket 93Cxxx CAT64LC010, CAT64LC020, CAT64LC040
Atmel EEPROM (page prog.) (Software Data Protection)	AT28C256, AT28C010, AT28C040
Nonvaltile SRAM (DS12xx)	DS1220,DS1225Y, DS1230Y/AB, DS1245Y/AB, DS1249Y/AB
static RAM (Test RAM)	6116, 6264, 62256, 62512, 628128
EPROM winbond,SST Electrical Erase Chip	W27E512, W27E010, W27C010, W27C020, W27C040 SST27SF256, SST27SF512, SST27SF010, SST27SF020 MX26C4000 Vcc = 3.3-3.6V SST37VF512, SST37VF010, SST37VF020, SST37VF040
Flash Memory SST,Sanyo	SST28SF040A ,LE28F4001
	Adapters
Atmel AT89Cxx (MCS-51) Adapter 32pin to MCS-51	Atmel Auto Setect AT89C51,52,55, AT89LV51,52,55 AT89S8252 (8K+2K), AT89S53, AT89LS8252,AT89LS53 AT89C1051,AT89C2051,AT89C4051 (20pin) AT89C51RC (32KB), AT89C55WD (6.2V) SST89C54/58, SI89C52 Intel Auto Select i87C51, i87C51FA, i87C51FB ------------------------------------------------ i8xC51,i8xC52,i8xC54,i8xC58 (tWP = 100uS*25 Pulse)
Atmel AVR 8-bit RISC AT90Sxxx (Parallel programming) Adapter 32pin to MCS-51	(read,write,erase,verify,checkempty,Lockbits ,Fusebits) [Flash memory/EEPROM] AT90S1200,AT90S2313 90S2333, 90S4433, 90S4414, 90S8515, 90S4434, 90S8535 reference AT90S2313 pin Function Lockbit read AT90S2313 Errata Sheet.pdf
MCS-48,MCS-41 Adapter 32pin to MCS-48/41	ROM (read/verify) P8048AH, P8049AH,P8050AH, P8042AH Vea = 12V P8041, P8042 OTP (read/verify/Progam) P8748,P8749H,P8742H Vea = 18V EPROM (read/verify/Progam) D8748,D8749,D8742,D8741, D8742 Vea = 18V
FLASH memory 8/16bit (Software Data Protection) Adapter (TSOP48)	Am29F400,Am29F800,29F160,29F320 (read,write byte mode) HY29F200, HY29F400, HY29F800 , AT49F2048A, AT49F4096A, AT49F8192A
FLASH memory 8/16bit (Vpp12V) (Software Data Protection) Adapter (TSOP48)	i28F200,i28F400,i28F800,i28F160 (TSOP48) 28F001(DIP32 or PLCC32)
EPROM 16bit (DIP40) (1-4Mbit) Adapter Eprom 16bit Eprom only	27C1024 (27C210), 27C2048 (27C2002), 27C4096 (27C4002), Schematic by Toomas Toots (read,Program byte mode by use Resister pull up Data Bus (0xFF), A0 select low or high byte)
EPROM 16bit (DIP42) (4-32Mbit) Adapter Eprom DIP42 Eprom only	M27C400(DIP40), 27C800, 27C160, 27C322 Schematic by Toomas Toots (read,Program byte mode by use Resister pull up Data Bus (0xFF), A0 select low or high byte)
FLASH memory 8/16bit (Software Data Protection) Adapter (TSOP48LV)	29LV200, 29LV400,29LV800,29LV160,29LV320 (read,write byte mode)
Firmware Hub / LPC FLASH Adapter Firmware Hub/LPC (PLCC32) (PP mode) (3.3V)	-- Firmware Hub 82802AB, 82802AC, AT49LW040, AT49LW080 SST49LF002A, SST49LF003A, SST49LF004A, SST49LF008A, PMC 49FL008T W49V002FA, W39V040FA -- LPC flash SST49LF020, SST49LF040 W49V002A, W39V040A WINBOND W39V040FA, W39V040FAP, W39V040BP, W39V04OBPZ, W49V040FBPZ, W39V040FCP, W39V040FCPZ W39V080AP, W39V080APZ, W39V080FAP, W39V080FAPZ (Newly added for software 0.98D8)
P28F002BC Adapter P28F002BC (DIP40)	BOOT BLOCK FLASH MEMORY - P28F002BC

Reviews

Customers who bought this product also purchased

MCS-48 Adapter

$69.95

Willem EPROM Programmer PCB6.0E[PCB6.0E]

Willem EPROM Programmer PCB6.0E
[PCB6.0E]