$69.95

Willem EPROM Programmer PCB6.0E
[PCB6.0E]

Willem EPROM Programmer PCB6.0E
Introducing our newest Universal Willem EPROM programmer PCB version PCB6.0E LPT version.  This board has many enhanced features, such as built-in dedicated SPI BIOS ZIF socket and DIP FWH / LPC socket, thus NO NEED to pay extra to purchase these optional adapters.  A FREE PLCC32toDIP32 adapter will be included for your convenience if you happen to have PLCC32 package chips to program.  The PCB layout is fully optimized and the digital circuitry is separated from the power supply circuit, thus reducing interferenceHigh precision digital switching ICs are used to control the Vpp circuit ( vs cheap regular transistor controlled, used in other manufacturers products), thus dramatically improves the burning accuracy and reliability by multitudes.  Quality components are used, for example, the high current tolerant coil is used to boost the robustness of the circuitry.  Optional higher Vcc voltages (5.6v and 6.2v) will be available when an external AC power supply is used.  This is very important when you want to smoothly and reliably burn those old CMOS and even older NMOS EPROM chips.  This programmer can also read and burn EEPROM, FLASH, and Microcontroller (MCS-51, AVR and PIC family) chips.

The serial part of the programmer supports more than 7951 SPI type of BIOS chips, which is listed HERE.



This ready-to-go package includes the following items:

1. Willem Universal EPROM Programmer Board, PCB version 6.0E LPT Version, fully assembled;
2. Software and manual CD;

3. A FREE PLCC32toDIP32 adapter;
4. FREE DB25 and USB cables;


 


We use USPS Priority mail service within USA, it usually takes about 2-3 working days to reach most locations within continental US. 


Device types supported

The serial part of the programmer supports more than 7951 SPI type of BIOS chips, which is listed HERE.  The parallel part of this Willem programmer supports the chips listed below:

EPROM

27C64, 27C128, 27C256, 27C512, 27C010, 27C020, 27C040, 27C1001
M27C1001, M27C2001, M27C4001
27C080 (A19) , M27C801, M87C257

2764, 27128, 27256, 27512, 27010

EEPROM

28C65,28C64, 28C128, 28C256,28C512, 28C010, 28C020, 28C040
M28C16A/17A (DIP28)
(Adapter or Jumper) 28C16,XLS2816 (DIP24)

FLASH Memory

28F64, 28F128, 28F256, 28F512,28F010, 28F020
MX26C1000, MX26C2000, MX28F1000, MX28F2000
Am28F256A, Am28F512A, Am28F010A, Am28F020A (New command erase/prog.)
-- intel ---
i28F001BX, 28F004, 28F008, 28F016

FLASH Memory

29F64, 29F128, 29F256, 29F512,29F010, 29F020, 29F040, 29F080
29F001,29F002, 29F004, 29F008, 29F016, 29F032

Serial (I2C) EEPROM
24Cxx

24C02,24C04,24C08,24C16, 85C72, 85C82, 85C92
--- page write ----
24C32,24C64,24C128,24C256,24C512

Microwire EEPROM

<------ Data 8bit -----> (pin 6 ->ORG. [Schematic connect to GND])
93C06, 93C46, 93LC46, 93C56, 93C57,
93C66, 93C76, 93C86 (8bit), AT59C11, AT59C22, AT59C13
CAT35C102, CAT35C104, CAT35C108 (pullup pin7)
<------Data 16bit------> (pin 6 ->NC [No Connect])
93C06A ,93C46X,93C56,93C66,93C76,93C86 (NS)

MicroChip PIC

16C84 , 16F84 ,16F84A , 16F627/16F628
12C508/A , 12C509/A , 12CE518 , 12CE519 , 16C505
16C620 , 16C621 , 16C622 , 16CE623 , 16CE624 , 16CE625 , 16C710/711
---ICSP connector----(you will need to have an optional PIC adapter in order to program these newly added PICs)
16F870 , 16F871 , 16F872 , 16F873 , 16F874 , 16F876 , 16F877 PIC16F873A , PIC16F874A , PIC16F876A , PIC16F877A
-Add PIC microchip 14bit
PIC12F629 , PIC12F675 , PIC16F630 , PIC16F676 , PIC12F635 , PIC12F683 , PIC16F636 , PIC16F684 , PIC16F688
PIC16F72/73/74/76/77 , PIC16F737/747/767/777 , PIC16F87/88 , rfPIC12F675x , PIC16F785/PS200 , PIC16F716
-Add microchip 14bit,12bit OTP
PIC12C671 , PIC12C672 , PIC12CE673 , PIC12CE674
PIC16C61/71 , PIC16C62/64/65/73 , PIC16C62A/62B/62C/63/63A/64A/65A/65B/66/67
PIC16C72/72A/73A/74A/74B/76/77 , PIC16C620/620A/621/621A/622/622A
PIC16CE/623/624/625 , PIC16C710/711/712/716 , PIC16C773/774 , PIC16C745/765/923/924 , PIC16C925/926
PIC16C554/556/557/558 , PIC16C432/433 , PIC16C717/770/771/781/782
-Add PIC microchip 14bit
PIC12F629/675 , PIC16F630/676 , PIC12F635/683 , PIC16F636/684/688 , PIC16F72/73/74/76/77 , PIC16F737/747/767/777 , PIC16F87/88 , rfPIC12F675x , PIC16F785/PS200 , PIC16F716
-Add microchip 14bit OTP
PIC12C671 , PIC12C672 , PIC12CE673 , PIC12CE674 , PIC16C61/71 , PIC16C62/64/65/73 , PIC16C62A/62B/62C/63/63A/64A/65A/65B/66/67 , PIC16C72/72A/73A/74A/74B/76/77 , PIC16C620/620A/621/621A/622/622A , PIC16CE/623/624/625 , PIC16C710/711/712/716 , PIC16C773/774 , PIC16C745/765/923/924 , PIC16C925/926 , PIC16C554/556/557/558 , PIC16C432/433 , PIC16C717/770/771/781/782
-Add PIC microchip 12bit (FLASH memory)
PIC12F508/509 , PIC10F200/202/204/206 , PIC16F505 , PIC16F54/57
-Add PIC18Fxxx
PIC18F242 , 18F248 , 18F252 , 18F258 , 18F442 , 18F448 , 16F452 , 16F458
PIC18F1220 , 18F2220 , 18F4220 , 18F1320 , 18F2320 , 18F4320
PIC18F6520 , 18F6620 , 18F6720 , 18F8520 , 18F8620 , 18F8720
PIC18F2331 , 18F2431 , 18F4331 , 18F4431
PIC18F6525 , 18F6621 , 18F8525 , 18F8621
PIC18F6585 , 18F6680 , 18F8585 , 18F8680
PIC18F2439 , 18F2539 , 18F4439 , 18F4539
PIC18F6410 , 18F8410 , 18F6490 , 18F8490
Add PIC18Fxxx
PIC18F2410 , PIC18F2420 , PIC18F2455
PIC18F2510 , PIC18F2515 , PIC18F2520 , PIC18F2525 , PIC18F2550 , PIC18F2585
PIC18F2610 , PIC18F2620 , PIC18F2680
PIC18F4410, PIC18F4420 , PIC18F4455
PIC18F4510 , PIC18F4515 , PIC18F4520 , PIC18F4525 , PIC18F4550 , PIC18F4585
PIC18F4610 , PIC18F4620 , PIC18F4680
Add Find and edit value OSCCAL (PIC12F629/675 , PIC16F630/676)
Add Edit config at address 0x2008,0x2009 (PIC12F635/683 , PIC16F636/684/688 , PIC16F785)
Fixed Programming PIC all
Test on chip
PIC12F675 , PIC16F676 , PIC16F684 ,PIC16F767, PIC16F74
PIC16F872 , PIC16F876 , PIC16F877, PIC16F876A, PIC16F873A, PIC16F819
PIC16F84 , PIC16F84A , PIC16F628, PIC16F628A,
eprom PIC12C509JW , PIC16C505JW , PIC16C711JW , PIC16CE625JW
PIC18F458 , PIC18F4320 , PIC18LF258 , PIC18F4539 , PIC18F4431

Atmel Flash Memory
(Sector Programming)
(Software Data Protection)

AT29C256, AT29C512,AT29C010A, AT29C020, AT29C040,AT29C040A
W29EE512,W29EE011, W29EE012, W29C020(128),W29C040
PH29EE010(W29EE011)

ASD AE29F1008 (AT29C010), AE29F2008 (AT29C020)
Ver 0.992 up(DOS). Can run under win9x
(disable prog. CPUIdle or CPUCool)

Atmel Flash Memory
AT49Fxxx (Subset 29Fxxx)
(Byte-by-Byte Programming)
(Software Data Protection)

Command seq. 5555/AA, 2AAA/55, 5555/A0
AT49F512, AT49F010, AT49F020, AT49F040
SST39SF010, SST3S9F020 ,SST39SF040
AT49F001,AT49F002 , AT49F008A

Command seq. 555/AA, 2AA/55, 555/A0
Am29F512, Am29F010, Am29F020, Am29F040,HY29F080
29F002, 29F002T, Pm29F002T

Serial Peripheral Interface (SPI)
EEPROM Mode0 (0,0)
AT25xxx, W95xxx

[Atmel] AT25010,020, 040 (A8-A0)
AT25080, 160, 320, 640, 128, 256 (A15-A0)
[ST] W95010....256, Microchip 25x010 - 25x640

--- Byte programming
25010,25020,25040
--- Page programming
25C080,25C160,25C320,25C640,25C128,25C256,25C512
AT25HP256,AT25HP512
AT25HP1024 (24bit address)

-- CAT64LCxxx (16bit DATA IN/OUT) use Socket 93Cxxx
CAT64LC010, CAT64LC020, CAT64LC040

Atmel EEPROM (page prog.)
(Software Data Protection)

AT28C256, AT28C010, AT28C040

Nonvaltile SRAM (DS12xx)

DS1220,DS1225Y, DS1230Y/AB, DS1245Y/AB, DS1249Y/AB

static RAM (Test RAM)

6116, 6264, 62256, 62512, 628128

EPROM winbond,SST
Electrical Erase Chip

W27E512, W27E010, W27C010, W27C020, W27C040
SST27SF256, SST27SF512, SST27SF010, SST27SF020
MX26C4000
Vcc = 3.3-3.6V SST37VF512, SST37VF010, SST37VF020, SST37VF040

Flash Memory SST,Sanyo

SST28SF040A ,LE28F4001

 



Adapters

Atmel AT89Cxx (MCS-51)
Adapter 32pin to MCS-51

Atmel Auto Setect
AT89C51,52,55, AT89LV51,52,55
AT89S8252 (8K+2K), AT89S53, AT89LS8252,AT89LS53
AT89C1051,AT89C2051,AT89C4051 (20pin)
AT89C51RC (32KB), AT89C55WD (6.2V)
SST89C54/58, SI89C52
Intel Auto Select
i87C51, i87C51FA, i87C51FB
------------------------------------------------
i8xC51,i8xC52,i8xC54,i8xC58 (tWP = 100uS*25 Pulse)

Atmel AVR 8-bit RISC AT90Sxxx
(Parallel programming)
Adapter 32pin to MCS-51

(read,write,erase,verify,checkempty,Lockbits ,Fusebits) [Flash memory/EEPROM]
AT90S1200,AT90S2313
90S2333, 90S4433, 90S4414, 90S8515, 90S4434, 90S8535
reference AT90S2313 pin
Function Lockbit read AT90S2313 Errata Sheet.pdf

MCS-48,MCS-41
Adapter 32pin to MCS-48/41

ROM (read/verify)
P8048AH, P8049AH,P8050AH
, P8042AH Vea = 12V
P8041, P8042

OTP (read/verify/Progam)
P8748,P8749H,P8742H Vea = 18V

EPROM (read/verify/Progam)
D8748,D8749,D8742,D8741, D8742 Vea = 18V

FLASH memory 8/16bit
(Software Data Protection)
Adapter (TSOP48)

Am29F400,Am29F800,29F160,29F320 (read,write byte mode)
HY29F200, HY29F400, HY29F800 , AT49F2048A, AT49F4096A, AT49F8192A

FLASH memory 8/16bit (Vpp12V)
(Software Data Protection)
Adapter (TSOP48)

i28F200,i28F400,i28F800,i28F160 (TSOP48)
28F001(DIP32 or PLCC32)

EPROM 16bit (DIP40) (1-4Mbit)
Adapter Eprom 16bit
Eprom only

27C1024 (27C210), 27C2048 (27C2002), 27C4096 (27C4002),
Schematic by Toomas Toots
(read,Program byte mode
by use Resister pull up Data Bus (0xFF), A0 select low or high byte)

EPROM 16bit (DIP42) (4-32Mbit)
Adapter Eprom DIP42
Eprom only

M27C400(DIP40), 27C800, 27C160, 27C322
Schematic by Toomas Toots
(read,Program byte mode
by use Resister pull up Data Bus (0xFF), A0 select low or high byte)

FLASH memory 8/16bit
(Software Data Protection)
Adapter (TSOP48LV)

29LV200, 29LV400,29LV800,29LV160,29LV320 (read,write byte mode)

Firmware Hub / LPC FLASH
Adapter Firmware Hub/LPC (PLCC32) (PP mode) (3.3V)

-- Firmware Hub
82802AB, 82802AC, AT49LW040, AT49LW080

SST49LF002A, SST49LF003A, SST49LF004A, SST49LF008A, PMC 49FL008T
W49V002FA, W39V040FA

-- LPC flash
SST49LF020, SST49LF040 W49V002A, W39V040A
WINBOND
W39V040FA, W39V040FAP, W39V040BP, W39V04OBPZ, W49V040FBPZ, W39V040FCP, W39V040FCPZ
W39V080AP, W39V080APZ, W39V080FAP, W39V080FAPZ
(Newly added for software 0.98D8)

P28F002BC
Adapter P28F002BC (DIP40)

BOOT BLOCK FLASH MEMORY
- P28F002BC

Reviews

Manufacturers
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search


$199.00
We Accept
0 items
Share Product
Share via E-Mail
Share on Facebook Share on Twitter
Currencies
KEE